Rectangular bars from ENAW 6082 – AlSi1MgMn – 3.2315

Aluminum alloy ENAW 6082 – AISi1MgMn is an alloy with a wide range of uses. A very large variety of industrial profiles are made from this material (round, rectangular, drawn or extruded bars, profiles, sheets, etc.), profiles that meet the most demanding quality requirements and European quality standards, to permanently ensure optimal performance in use.

Broad spectrum

Alloy ENAW 6082 has a wide field of use. The advantages of this universal alloy are highlighted especially when the finished products result from a technological process of chipping, followed by surface treatment.

Areas of use

ENAW 6082 bars have a wide applicability in the field of machine constructions, as well as in the field of welded constructions. It perfectly corresponds to the requirements necessary for the development of parts / components subject to oscillating stresses, rotating parts, being used as base plates of different sub-assemblies. Casings for hydraulic pumps or component parts of hydraulic systems can be manufactured.

Processability

It behaves well when processed by chipping (although it results in a continuous spiral chip), it can be anodized, both natural and colored, and from the point of view of weldability, the MIG/WIG process is recommended.

Corrosion resistance: good in normal environment.

Rectangular bars according to ENAW 2007 – AlCu4PbMgMn – 3.1645

Through a precise manufacturing technology, with strict compliance with the standards, an alloy was obtained that satisfies the users' requirements both in terms of quality and the excellent characteristics of the material. Alloys for automata bear the mark of maximum machinability that characterizes aluminum and its component alloys.

Due to the excellent machinability and mechanical characteristics, a 40% saving in machining time is obtained (compared to a steel of the same dimensions and mechanical characteristics).

Alloy with a wide range of use

The alloy ENAW 2007 (AICu4PbMgMn) has a wide range of use especially there where the basic condition is very good machinability through cutting and the possibility of surface treatment.

Surface treatment

The finished part can be treated superficially by simple anodization (anodization), (hard anodization, colored anodization - through a special technology - limited application); it can also be excellently polished and polished.

Areas of use

This alloy has a wide range of use, from simple parts obtained by chipping to complex hydraulic parts with high bearing capacity. Due to its good resistance to wear, it can also be used in the field of machine construction equipment (gear wheels, guide shafts, racks, guide rails, etc.), in the field of pneumatic and hydraulic systems for the manufacture of valves.

Rectangular bars from ENAW 7075 – AlZn5.5MgCu – 3.4365

Superior alloy with special machinability - used for the execution of various milestones in the aeronautical, military or general industrial fields, parts where high resistance is required or components subject to high demands.